« platformioでpicoを動かす | トップページ | LCDをmicrobit_arduinoで動かす »

2021年4月26日 (月)

Display_Packをpico_arduinoで動かす

2021/4/28
LEDとSWの制御スケッチを追加した。

2021/4/25
初版

pio Pico Arduino Display Pack

pio Pico Arduino Display Pack

概要

以下のDisplay_Packをpico_arduinoで動かす
Pico Display Pack
(ホストはubuntu20.04を想定している)
platformioが既にインストールされている前提で説明する。

platformioのインストールについては以下などを参照のこと:
arduinoフレームワーク用platformio.ini集

platformio.ini

以下のplatformio.iniを利用する:

[env:pico] platform = https://github.com/platformio/platform-raspberrypi.git framework = arduino board = pico build_flags = -DPICO upload_port = /dev/ttyACM0 monitor_port = /dev/ttyACM0 monitor_speed = 115200 lib_ldf_mode = deep+ lib_deps = adafruit/Adafruit BusIO @ ^1.7.3 adafruit/Adafruit ST7735 and ST7789 Library @ ^1.7.1

graphicstest.ino

テスト用プログラムを以下のように作成する:
src/graphicstest.ino

// modified for pimoroni display pack (2021/4/25) /************************************************************************** This is a library for several Adafruit displays based on ST77* drivers. Works with the Adafruit 1.8" TFT Breakout w/SD card ----> http://www.adafruit.com/products/358 The 1.8" TFT shield ----> https://www.adafruit.com/product/802 The 1.44" TFT breakout ----> https://www.adafruit.com/product/2088 The 1.14" TFT breakout ----> https://www.adafruit.com/product/4383 The 1.3" TFT breakout ----> https://www.adafruit.com/product/4313 The 1.54" TFT breakout ----> https://www.adafruit.com/product/3787 The 2.0" TFT breakout ----> https://www.adafruit.com/product/4311 as well as Adafruit raw 1.8" TFT display ----> http://www.adafruit.com/products/618 Check out the links above for our tutorials and wiring diagrams. These displays use SPI to communicate, 4 or 5 pins are required to interface (RST is optional). Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit! Written by Limor Fried/Ladyada for Adafruit Industries. MIT license, all text above must be included in any redistribution **************************************************************************/ #include <Adafruit_GFX.h> // Core graphics library #include <Adafruit_ST7735.h> // Hardware-specific library for ST7735 #include <Adafruit_ST7789.h> // Hardware-specific library for ST7789 #include <SPI.h> #ifndef PICO #if defined(ARDUINO_FEATHER_ESP32) // Feather Huzzah32 #define TFT_CS 14 #define TFT_RST 15 #define TFT_DC 32 #elif defined(ESP8266) #define TFT_CS 4 #define TFT_RST 16 #define TFT_DC 5 #else // For the breakout board, you can use any 2 or 3 pins. // These pins will also work for the 1.8" TFT shield. #define TFT_CS 10 #define TFT_RST 9 // Or set to -1 and connect to Arduino RESET pin #define TFT_DC 8 #endif // OPTION 1 (recommended) is to use the HARDWARE SPI pins, which are unique // to each board and not reassignable. For Arduino Uno: MOSI = pin 11 and // SCLK = pin 13. This is the fastest mode of operation and is required if // using the breakout board's microSD card. // For 1.44" and 1.8" TFT with ST7735 use: Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST); // For 1.14", 1.3", 1.54", and 2.0" TFT with ST7789: //Adafruit_ST7789 tft = Adafruit_ST7789(TFT_CS, TFT_DC, TFT_RST); // OPTION 2 lets you interface the display using ANY TWO or THREE PINS, // tradeoff being that performance is not as fast as hardware SPI above. //#define TFT_MOSI 11 // Data out //#define TFT_SCLK 13 // Clock out // For ST7735-based displays, we will use this call //Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCLK, TFT_RST); // OR for the ST7789-based displays, we will use this call //Adafruit_ST7789 tft = Adafruit_ST7789(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCLK, TFT_RST); #endif #ifdef PICO // setup for pico display pack #define TFT_CS 17 #define TFT_RST -1 #define TFT_DC 16 #define TFT_MOSI 19 // Data out #define TFT_SCLK 18 // Clock out #define BL_EN 20 // backlit enable Adafruit_ST7789 tft = Adafruit_ST7789(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCLK, TFT_RST); #endif float p = 3.1415926; void setup(void) { //pinMode(BL_EN, OUTPUT); //digitalWrite(BL_EN, HIGH); //Serial.begin(9600); Serial.begin(115200); Serial.print(F("Hello! ST77xx TFT Test")); #ifndef PICO // Use this initializer if using a 1.8" TFT screen: tft.initR(INITR_BLACKTAB); // Init ST7735S chip, black tab // OR use this initializer if using a 1.8" TFT screen with offset such as WaveShare: // tft.initR(INITR_GREENTAB); // Init ST7735S chip, green tab // OR use this initializer (uncomment) if using a 1.44" TFT: //tft.initR(INITR_144GREENTAB); // Init ST7735R chip, green tab // OR use this initializer (uncomment) if using a 0.96" 160x80 TFT: //tft.initR(INITR_MINI160x80); // Init ST7735S mini display // OR use this initializer (uncomment) if using a 1.3" or 1.54" 240x240 TFT: //tft.init(240, 240); // Init ST7789 240x240 // OR use this initializer (uncomment) if using a 2.0" 320x240 TFT: //tft.init(240, 320); // Init ST7789 320x240 // OR use this initializer (uncomment) if using a 1.14" 240x135 TFT: //tft.init(135, 240); // Init ST7789 240x135 // SPI speed defaults to SPI_DEFAULT_FREQ defined in the library, you can override it here // Note that speed allowable depends on chip and quality of wiring, if you go too fast, you // may end up with a black screen some times, or all the time. //tft.setSPISpeed(40000000); #endif #ifdef PICO tft.init(135, 240); // Init ST7789 240x135 //tft.setRotation(3); // landscape tft.setRotation(2); // rotate for matching printing chars on the board tft.setSPISpeed(40000000); #endif Serial.println(F("Initialized")); uint16_t time = millis(); tft.fillScreen(ST77XX_BLACK); time = millis() - time; Serial.println(time, DEC); delay(500); // large block of text tft.fillScreen(ST77XX_BLACK); testdrawtext("Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur adipiscing ante sed nibh tincidunt feugiat. Maecenas enim massa, fringilla sed malesuada et, malesuada sit amet turpis. Sed porttitor neque ut ante pretium vitae malesuada nunc bibendum. Nullam aliquet ultrices massa eu hendrerit. Ut sed nisi lorem. In vestibulum purus a tortor imperdiet posuere. ", ST77XX_WHITE); delay(1000); // tft print function! tftPrintTest(); delay(4000); // a single pixel tft.drawPixel(tft.width()/2, tft.height()/2, ST77XX_GREEN); delay(500); // line draw test testlines(ST77XX_YELLOW); delay(500); // optimized lines testfastlines(ST77XX_RED, ST77XX_BLUE); delay(500); testdrawrects(ST77XX_GREEN); delay(500); testfillrects(ST77XX_YELLOW, ST77XX_MAGENTA); delay(500); tft.fillScreen(ST77XX_BLACK); testfillcircles(10, ST77XX_BLUE); testdrawcircles(10, ST77XX_WHITE); delay(500); testroundrects(); delay(500); testtriangles(); delay(500); mediabuttons(); delay(500); Serial.println("done"); delay(1000); } void loop() { tft.invertDisplay(true); delay(500); tft.invertDisplay(false); delay(500); } void testlines(uint16_t color) { tft.fillScreen(ST77XX_BLACK); for (int16_t x=0; x < tft.width(); x+=6) { tft.drawLine(0, 0, x, tft.height()-1, color); delay(0); } for (int16_t y=0; y < tft.height(); y+=6) { tft.drawLine(0, 0, tft.width()-1, y, color); delay(0); } tft.fillScreen(ST77XX_BLACK); for (int16_t x=0; x < tft.width(); x+=6) { tft.drawLine(tft.width()-1, 0, x, tft.height()-1, color); delay(0); } for (int16_t y=0; y < tft.height(); y+=6) { tft.drawLine(tft.width()-1, 0, 0, y, color); delay(0); } tft.fillScreen(ST77XX_BLACK); for (int16_t x=0; x < tft.width(); x+=6) { tft.drawLine(0, tft.height()-1, x, 0, color); delay(0); } for (int16_t y=0; y < tft.height(); y+=6) { tft.drawLine(0, tft.height()-1, tft.width()-1, y, color); delay(0); } tft.fillScreen(ST77XX_BLACK); for (int16_t x=0; x < tft.width(); x+=6) { tft.drawLine(tft.width()-1, tft.height()-1, x, 0, color); delay(0); } for (int16_t y=0; y < tft.height(); y+=6) { tft.drawLine(tft.width()-1, tft.height()-1, 0, y, color); delay(0); } } void testdrawtext(char *text, uint16_t color) { tft.setCursor(0, 0); tft.setTextColor(color); tft.setTextWrap(true); tft.print(text); } void testfastlines(uint16_t color1, uint16_t color2) { tft.fillScreen(ST77XX_BLACK); for (int16_t y=0; y < tft.height(); y+=5) { tft.drawFastHLine(0, y, tft.width(), color1); } for (int16_t x=0; x < tft.width(); x+=5) { tft.drawFastVLine(x, 0, tft.height(), color2); } } void testdrawrects(uint16_t color) { tft.fillScreen(ST77XX_BLACK); for (int16_t x=0; x < tft.width(); x+=6) { tft.drawRect(tft.width()/2 -x/2, tft.height()/2 -x/2 , x, x, color); } } void testfillrects(uint16_t color1, uint16_t color2) { tft.fillScreen(ST77XX_BLACK); for (int16_t x=tft.width()-1; x > 6; x-=6) { tft.fillRect(tft.width()/2 -x/2, tft.height()/2 -x/2 , x, x, color1); tft.drawRect(tft.width()/2 -x/2, tft.height()/2 -x/2 , x, x, color2); } } void testfillcircles(uint8_t radius, uint16_t color) { for (int16_t x=radius; x < tft.width(); x+=radius*2) { for (int16_t y=radius; y < tft.height(); y+=radius*2) { tft.fillCircle(x, y, radius, color); } } } void testdrawcircles(uint8_t radius, uint16_t color) { for (int16_t x=0; x < tft.width()+radius; x+=radius*2) { for (int16_t y=0; y < tft.height()+radius; y+=radius*2) { tft.drawCircle(x, y, radius, color); } } } void testtriangles() { tft.fillScreen(ST77XX_BLACK); uint16_t color = 0xF800; int t; int w = tft.width()/2; int x = tft.height()-1; int y = 0; int z = tft.width(); for(t = 0 ; t <= 15; t++) { tft.drawTriangle(w, y, y, x, z, x, color); x-=4; y+=4; z-=4; color+=100; } } void testroundrects() { tft.fillScreen(ST77XX_BLACK); uint16_t color = 100; int i; int t; for(t = 0 ; t <= 4; t+=1) { int x = 0; int y = 0; int w = tft.width()-2; int h = tft.height()-2; for(i = 0 ; i <= 16; i+=1) { tft.drawRoundRect(x, y, w, h, 5, color); x+=2; y+=3; w-=4; h-=6; color+=1100; } color+=100; } } void tftPrintTest() { tft.setTextWrap(false); tft.fillScreen(ST77XX_BLACK); tft.setCursor(0, 30); tft.setTextColor(ST77XX_RED); tft.setTextSize(1); tft.println("Hello World!"); tft.setTextColor(ST77XX_YELLOW); tft.setTextSize(2); tft.println("Hello World!"); tft.setTextColor(ST77XX_GREEN); tft.setTextSize(3); tft.println("Hello World!"); tft.setTextColor(ST77XX_BLUE); tft.setTextSize(4); tft.print(1234.567); delay(1500); tft.setCursor(0, 0); tft.fillScreen(ST77XX_BLACK); tft.setTextColor(ST77XX_WHITE); tft.setTextSize(0); tft.println("Hello World!"); tft.setTextSize(1); tft.setTextColor(ST77XX_GREEN); tft.print(p, 6); tft.println(" Want pi?"); tft.println(" "); tft.print(8675309, HEX); // print 8,675,309 out in HEX! tft.println(" Print HEX!"); tft.println(" "); tft.setTextColor(ST77XX_WHITE); tft.println("Sketch has been"); tft.println("running for: "); tft.setTextColor(ST77XX_MAGENTA); tft.print(millis() / 1000); tft.setTextColor(ST77XX_WHITE); tft.print(" seconds."); } void mediabuttons() { // play tft.fillScreen(ST77XX_BLACK); tft.fillRoundRect(25, 10, 78, 60, 8, ST77XX_WHITE); tft.fillTriangle(42, 20, 42, 60, 90, 40, ST77XX_RED); delay(500); // pause tft.fillRoundRect(25, 90, 78, 60, 8, ST77XX_WHITE); tft.fillRoundRect(39, 98, 20, 45, 5, ST77XX_GREEN); tft.fillRoundRect(69, 98, 20, 45, 5, ST77XX_GREEN); delay(500); // play color tft.fillTriangle(42, 20, 42, 60, 90, 40, ST77XX_BLUE); delay(50); // pause color tft.fillRoundRect(39, 98, 20, 45, 5, ST77XX_RED); tft.fillRoundRect(69, 98, 20, 45, 5, ST77XX_RED); // play color tft.fillTriangle(42, 20, 42, 60, 90, 40, ST77XX_GREEN); }

・「Adafruit ST7735 and ST7789 Library 」にあるExamplesをDisplay_Pack向けに修正したもの。
・「#ifdef PICO ... #endif」などで囲まれた部分が修正部分になる。

ビルド&書き込み

以下の手順でビルトと書き込みができる:

cd pico_proj # ツールなどのインストール(最初の1回のみ) pio run -t clean # ビルドと書き込み # bootselボタンを押しながらホストにUSB接続して # その後、bootselボタンを離すると、書き込み用ストレージが出現する pio run -t upload # この時点で書き込みが完了する

Pico_LED_SW.ino (2021/4/28)

Display_PackのLEDとSWの制御スケッチを以下に紹介する:

src/Pico_LED_SW.ino

// for pimoroni Display Pack (2021/4/28) // setup LEDs & SWs #define LED_R 6 #define LED_G 7 #define LED_B 8 #define SW_A 12 #define SW_B 13 #define SW_X 14 #define SW_Y 15 int swn = 0; int sSW_A = LOW; int sSW_B = LOW; int sSW_X = LOW; int sSW_Y = LOW; int brightness = 0; // how bright the LED is int fadeAmount = 5; // how many points to fade the LED by void setup(void) { // init LEDs (negative logic) pinMode(LED_R, OUTPUT); digitalWrite(LED_R, HIGH); pinMode(LED_G, OUTPUT); digitalWrite(LED_G, HIGH); pinMode(LED_B, OUTPUT); digitalWrite(LED_B, HIGH); //digitalWrite(LED_R, LOW); //digitalWrite(LED_G, LOW); //digitalWrite(LED_B, LOW); // setup SWs pinMode(SW_A, INPUT_PULLUP); pinMode(SW_B, INPUT_PULLUP); pinMode(SW_X, INPUT_PULLUP); pinMode(SW_Y, INPUT_PULLUP); Serial.begin(115200); Serial.print(F("LEDs and SWs Test")); } void loop() { // set the brightness switch(swn) { case 0: analogWrite(LED_R, brightness); // other LEDs off pinMode(LED_G, OUTPUT); digitalWrite(LED_G, HIGH); pinMode(LED_B, OUTPUT); digitalWrite(LED_B, HIGH); break; case 1: analogWrite(LED_G, brightness); // other LEDs off pinMode(LED_R, OUTPUT); digitalWrite(LED_R, HIGH); pinMode(LED_B, OUTPUT); digitalWrite(LED_B, HIGH); break; case 2: analogWrite(LED_B, brightness); // other LEDs off pinMode(LED_R, OUTPUT); digitalWrite(LED_R, HIGH); pinMode(LED_G, OUTPUT); digitalWrite(LED_G, HIGH); break; default: pinMode(LED_R, OUTPUT); digitalWrite(LED_R, HIGH); pinMode(LED_G, OUTPUT); digitalWrite(LED_G, HIGH); pinMode(LED_B, OUTPUT); digitalWrite(LED_B, HIGH); analogWrite(LED_R, brightness); analogWrite(LED_G, brightness); analogWrite(LED_B, brightness); } // change the brightness for next time through the loop: brightness = brightness + fadeAmount; // reverse the direction of the fading at the ends of the fade: if (brightness <= 0 || brightness >= 255) { fadeAmount = -fadeAmount; } sSW_A = digitalRead(SW_A); sSW_B = digitalRead(SW_B); sSW_X = digitalRead(SW_X); sSW_Y = digitalRead(SW_Y); if (sSW_A == LOW) {swn=0; Serial.println("SW_A: pressed");} if (sSW_B == LOW) {swn=1; Serial.println("SW_B: pressed");} if (sSW_X == LOW) {swn=2; Serial.println("SW_X: pressed");} if (sSW_Y == LOW) {swn=3; Serial.println("SW_Y: pressed");} do { sSW_A = digitalRead(SW_A); sSW_B = digitalRead(SW_B); sSW_X = digitalRead(SW_X); sSW_Y = digitalRead(SW_Y); delay(50); } while ((sSW_A == LOW)||(sSW_B == LOW)||(sSW_X == LOW)||(sSW_Y == LOW)) ; }

(1)スイッチ(SW_A,SW_B,SW_X,SW_Y)を押すとスイッチの状態がシリアル出力される。
(2)SW_Aを押すとLEDが赤、SW_Bを押すとLEDが緑、SW_Xを押すとLEDが青、SW_Yを押すと白に、明るさが変化しながら光る。

ただし、Arduino純正ボードライブラリ(platformio,Arduino-IDEとも)にバグがあるようで、SW_Yは動作せず、LEDの色も混じった色になり意図したものと異なる。(pinModeのbug??)

earlephilhower版Arduino-IDE(以下のjsonファイルを設定するもの)のボードライブラリは問題が無いようで、SW_Yも正常動作するし、LEDの色も混ざらない。

https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json

参考情報

Arduino-IDE関連:
Arduino-IDEでPicoを動かす

Pico-Platformio(Arduino)関連:
platformioでpicoを動かす
Official PlatformIO + Arduino IDE support for the Raspberry Pi Pico is now available!

platformio関連:
PlatformIO Core (CLI)
Arduino-IDEとPlatformioのコンパイラーの挙動の違いについて
arduinoフレームワーク用platformio.ini集
ubuntu20.04をインストールする

以上

|

« platformioでpicoを動かす | トップページ | LCDをmicrobit_arduinoで動かす »

PlatformIO」カテゴリの記事

Arduino」カテゴリの記事

Pico」カテゴリの記事

コメント

コメントを書く



(ウェブ上には掲載しません)




« platformioでpicoを動かす | トップページ | LCDをmicrobit_arduinoで動かす »